Knowledge about air regulators

With the development of agriculture and industrial air pollution is becoming more and more serious, and outdoor air pollution can also seriously affect indoor air quality. Air regulators can adjust the temperature, humidity, carbon dioxide concentration, and other parameters of the indoor environment, but also purify the air, which is a common device in modern home life, greatly increasing the comfort of people's lives. More and more people are buying air regulators, so do you understand the main functions and structure of air regulators and the working principle of air regulators? Let's take a look!

Here is the content list:

• The main function of the air regulator

• Structure of air regulator

• The working principle of air regulator

The main function of the air regulator

The main function of an air regulator is to filter, cool, and dehumidify the air to achieve automatic regulation of indoor temperature. An air regulator is a device that provides treated air directly to a room or other confined area. It mainly includes cooling systems for cooling and dehumidification, air circulation and purification devices, heating and ventilation devices, etc. Air regulators can automatically adjust the output of new air by adjusting the compressor frequency or speed within a certain range, which can change the flow of refrigerant, and play the ability to best match the environmental condition.

Structure of air regulator

Refrigeration system: It is the cooling part of the air regulator and consists of a sealed refrigeration cycle with a refrigeration compressor, condenser, capillary tube, evaporator, electromagnetic reversing valve, filter, refrigerant, etc.

Wind system: is the air regulator to accelerate the room air heat exchange part, by the centrifugal fan, axial fan, and other equipment.

Electrical system: is the air regulator to promote the compressor, fan safety operation, and temperature control part, by the motor, thermostat, relay, capacitor and heater, and other components. Box and panel are the frameworks of the air regulator, the components of the support seat and airflow guidance part, the box, panel, louver grille, and other components.

The working principle of air regulator

The working principle of an air regulator is that the compressor inhales low-temperature and low-pressure refrigerant gas, which is compressed into high-pressure and high-temperature gas and discharged to the condenser and cooled by the cold air discharged from the axial fan, so that the high-pressure and high-temperature gas in the condenser condenses into liquid, and then becomes low pressure and low-temperature liquid through the capillary throttle to enter the evaporator and vaporize, absorbing the heat of the indoor air inhaled by the centrifugal fan operation and cooling the indoor air. After cooling the indoor air in the role of the centrifugal fan, through the air duct and sent back to the room. When the air flows through the evaporator, because the surface temperature of the evaporator is lower than the dew point temperature of indoor air, the water vapor in the air condenses into water when it cools down sharply and drips into the sump of the air regulator, which is led to the outdoor by the drain. So repeatedly cycle, you can adjust the indoor temperature and humidity. Air purification by the air regulator filter device to complete. The filtration device consists of an intake grille and a filter. The filter is generally made of polyurethane foam, which has a good dust filtering effect on the air.

In general, air regulators are the company's main product. For consumers, air regulators are effective. The company will be more committed to producing more and better air regulators for consumers. If you are interested in air regulators, if you are interested in the business of air regulators, you can go to our website for consultation, our website is https://www.anruk.com/.