Introduction of Tube And Part

Tube And Parts are lightweight, easy to carry, and easy to operate in the field. You can use it to cut steel, plastic, copper, cast iron, stainless steel, and multi-layer pipes. Next, let's take a look at the introduction of Tube And Part. Here are some answers.

Here is the content list:

• The advantages and innovations of Tube And Part.

• The working principle of Tube And Part.

• Precautions for using Tube And Part.

The advantages and innovations of Tube And Part.

First, Tube And Part greatly improve and alleviate installation safety as well as fire safety. Second, precision cutting, both sides of the tube are flat after cutting, which is easy to connect. Third, the cutting method is simple and fast, saving a lot of working time. Fourth, provide a lightweight working method, you can design your cutting plan according to the workplace. Fifth, Tube And Part are highly safe, no need to move the tube by hand when working. Sixth, Tube And Part cutting will not produce sparks and dust to the outside world. Seventh, Tube And Part full function, can cut all kinds of built-up pipes of the electric power system. Eighth, cutting pipe materials all, such as steel, stainless steel, cast iron, copper, plastic, and multi-layer pipe can be cut. Ninth, Tube And Part have no specific requirements for pipe diameter and working platform. Tenth, Tube And Parts is good quality and low price, high-cost performance.

The working principle of Tube And Part.

Tube And Part can automatically clip material, feed knife, feed material, size setting, fixed number stop and work metering, and other functions. The main circuit of the machine works with PLC programmable logic controller. Automatic feeding, clamping, and cutting system, accurate and fast feeding, 10-50 times cutting per minute. The counter can set the number of times to cut the material, and automatically stop after the material is cut. Which does not need manual operation at all, higher mechatronics, even one person can operate more than one, reduce staff. The total counter can count the workload record of a day. The total pressure, front, back, and pressure can be adjusted without segment to ensure that the workpiece is not pinched and deformed, using servo Tube And Part, the accuracy of cutting length is guaranteed within plus or minus 0.05mm (its error is mainly generated in the steel pipe and the top of the tool), and the cutting edge is glossy without burr.

Precautions for using Tube And Part.

First, spindle speed change must be done after stopping. Gears should be fully engaged when shifting. When you find that the machine is not normal, stop and check immediately. Second, adjust the tool and clamp the workpiece before cutting. The length of the clamping part should not be less than 50 mm. Parking stopper to be fixed, after clamping, release, forward, backward, and another sequential test drive, before work. Third, when the machine tool is rotating, no part of the human body should not touch the transmission parts. When operating, tie the cuffs, gloves are strictly prohibited to work. The human head should deviate from the cutting direction. Fourth, when changing tools, measuring the workpiece, lubrication, and cleaning the tube head, must stop. Fifth, Tube And Part cutting tube head, to prevent the tube head from flying out to hurt people. Sixth, the long material tube into the material frame and loosening the bundle of lead wire, should take measures to prevent the tube from rolling, impacting, and pressure injury to people. Seventh, the dust removal device of the Tube And Part should be intact before cutting. Eighth, no one should stand in the direction of the workpiece in and out of the material.

If you are interested in our Tube And Part products or have other needs, please feel free to contact us. Our official website is https://www.anruk.com/.