Solenoid Valve installation precautions

When installing products such as Solenoid Valve, users should pay attention to some basic operational issues. Whether the Solenoid Valve is installed correctly will also have a great impact on the efficiency and stability of the Solenoid Valve product, and will accelerate the wear rate of the Solenoid Valve components and reduce the service life. It is more likely to cause accidental damage to the Solenoid Valve due to improper operation.

Here is the content list:

• Before Solenoid Valve is installed

• When Solenoid Valve is installed

• After Solenoid Valve is installed

Before Solenoid Valve is installed

To install the Solenoid Valve, first of all, ensure that the working conditions of the Solenoid valve are consistent with the actual working environment, beyond the scope of the Solenoid Valve, do not force the installation, otherwise, it will easily cause damage and accidents to the Solenoid valve. The main working conditions that need attention are power supply voltage, current range, pressure difference range, medium properties, working environment, and working temperature. Except for the vacuum pipeline and special circumstances, the general Solenoid valve must pay attention to the installation direction of the Solenoid valve when installing. Typically, Solenoid Valves have an arrow-like marking on the valve body. This indicates the orientation of the medium. Different working environments have corresponding Solenoid Valve products. Users can choose products suitable for the working environment, and do not install inappropriate Solenoid Valve models. Since Solenoid Valve is often used together with fluid conveying equipment such as pumps, water hammers may occur in actual work. In the process of choosing a Solenoid Valve, users must choose a Solenoid Valve with waterproof performance.

When Solenoid Valve is installed

The installation direction of the Solenoid Valve in the pipeline system should be installed according to the identification, and the installation of Solenoid Valve coil should be installed vertically on the pipeline, and keep the pipeline and the ground level. Otherwise, the Solenoid Valve is prone to malfunction or not work properly when in working condition. However, please consult the Solenoid Valve manufacturer when using it in some special working environment. Since Solenoid Valve products are related to electromagnetics, they have higher requirements on the working environment, such as the cleanliness of the interior and pipelines, electromagnetic interference, etc. Therefore, the user needs to clean and purge the pipeline and its interior to ensure the cleanliness of the interior and the pipeline, to prevent impurities from affecting the normal operation of the Solenoid Valve. To ensure that the Solenoid Valve will not be affected by foreign matter in the pipeline during work, it is necessary to install filters and filters in the pipeline.

After Solenoid Valve is installed

If the Solenoid Valve works for a long time and the working environment is not good, the user needs to add a bypass in the installation to facilitate maintenance when the Solenoid Valve works and fails. Normally open and normally closed Solenoid Valves cannot be used interchangeably. If they are interchanged, the solenoid coil of the valve body will be burned and the service life of the Solenoid Valve will be reduced. Therefore, users should not keep the Solenoid Valve powered on for a long time in actual use. In addition, different Solenoid Valves, such as steam Solenoid Valves, are explosion-proof, high/low pressure, high and low temperature, etc. Solenoid Valves of different types and uses will have different working conditions. Users should pay attention to the selection and use of Solenoid Valve models.

If you are interested in our Solenoid Valve products or have other needs, please feel free to contact us. Our official website is https://www.anruk.com/. Our cost-effective products will bring you a better experience.